• TRZ® Analyzer

    Ultrasonic transducer and horn analyzer.

    TRZ Horn Analyzer TRZ Horn Analyzer software converter curve

    TRZ® Analyzer is a dedicated test instrument for the maintenance, manufacturing and quality control of power ultrasonic transducers, converters, boosters, horns and acoustic stacks. It determines the frequencies, impedances and the mechanical quality factor of the device under test. It has a software which makes the tuning process easier, applies acceptance criteria, generates test report and saves/compares results.

  • SonicSniffer®

    Non-contact ultrasonic frequency meter.

    Ultrasonic frequency meter SonicSniffer

    Don’t fly blind! The SonicSniffer® allows establishing an operating frequency baseline for ultrasonic welding equipment and detects frequency shifts, which indicate when there is need to perform preventive maintenance. Routine readings alert that something is not right possibly avoiding equipment failure and saving unnecessary expenses with new converters, boosters and horns.

  • PiezoClamping®

    Prestress and charge meter for piezoceramics.

    Presstress & Charge Meter PiezoClamping

    PiezoClamping® is a piece of novel equipment to standardize the prestress on the piezoceramics, preventing possible damage to converters and power ultrasonic transducers. Simply connect the PiezoClamping®, entry the ceramic parameters and tighten the transducer until the target prestress is achieved. Unlike the tightening torque, prestress is a well-known value depending only on the ceramic type. The tightening can be applied slowly and with pauses without affecting the result.

  • Sonelastic® HZ

    Elastic moduli characterization for accurate Finite Element Modeling and Analysis

    Sonelastic elastic properties FEA FEM horn Sonelastic software elastic properties FEA FEM horn FEA FEM elastic properties ultrasonic horn

    Knowing the elastic moduli exact values is crucial for accurate Finite Element Analysis and Modeling (FEA/FEM). Sonelastic® HZ enables you to measure the Young’s modulus, Shear modulus, Poisson´s ratio and damping of metallic alloys used in the manufacturing of ultrasonic horns and parts. Sonelastic® HZ may even eliminate the need for interactive milling with frequency measurement for horn tuning.

Services

Support to power ultrasonics equipment use, maintenance, quality control and development.
Power Ultrasonic Basics
TRAINING
and development
Consulting and advisory Power Ultrasonics Piezo
CONSULTING
and advisory
Elastic properties FEA FEM ultrasonic
MATERIALS
characterization
SI Traceable calibration
SI TRACEABLE
calibration